aml2002 no. a1837-1/7 features ? v ceo =200v, i c =0.7a ? low collector-to-emitter saturation voltage v ce (sat)=0.125v(typ.)@i c =0.35a ? high-speed switching t f =70ns(typ.)@i c =0.3a ? the plastic-covered heat sink eliminates the need for an insulator when mounting the aml2002 speci cations absolute maximum ratings at ta=25c parameter symbol conditions ratings unit collector-to-base voltage v cbo 220 v collector-to-emitter voltage v ceo 200 v emitter-to-base voltage v ebo 8v collector current i c 0.7 a collector current (pulse) i cp 2a collector dissipation p c 1.5 w tc=25 c10w junction temperature tj 150 c storage temperature tstg -55 to +150 c package dimensions unit : mm (typ) 7516a-002 ordering number : ENA1837a 82912 tkim/12611cb tkim tc-00002562 sanyo semiconductors data sheet http://www.sanyosemi.com/en/network/ aml2002 npn epitaxial planar silicon transistor led back light product & package information ? package : to-126ml ? jeita, jedec : to-126 ? minimum packing quantity : 200 pcs./bag marking electrical connection 1 : emitter 2 : collector 3 : base sanyo : to-126ml 0.8 0.75 2.4 4.8 0.8 0.7 8.0 4.0 1.0 1.0 3.6 1.4 1.6 1.5 1.7 7.5 3.0 15.5 11.0 3.3 3.0 123 lot no. l2002 3 1 2 aml2002
aml2002 no. a1837-2/7 electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max collector cutoff current i cbo v cb =100v, i e =0a 1 a emitter cutoff current i ebo v eb =4v, i c =0a 1 a dc current gain h fe v ce =5v, i c =100ma 200 560 gain-bandwidth product f t v ce =10v, i c =100ma 120 mhz output capacitance cob v cb =10v, f=1mhz 9 pf collector-to-emitter saturation voltage v ce (sat) i c =0.35a, i b =35ma 125 220 mv base-to-emitter saturation voltage v be (sat) i c =0.35a, i b =35ma 0.82 1.2 v collector-to-base breakdown voltage v (br)cbo i c =10 a, i e =0a 220 v collector-to-emitter breakdown voltage v (br)ceo i c =1ma, r be = 200 v emitter-to-base breakdown voltage v (br)ebo i e =10 a, i c =0a 8 v turn-on time t on see speci ed test circuit. 50 ns storage time t stg 2 s fall time t f 70 ns switching time test circuit ordering information device package shipping memo aml2002 to-126ml 200pcs./bag pb free r b v cc =100v i c =10i b1 = --10i b2 =0.3a + 50 input output r l 820 f pw=50 s i b1 d.c. 1% i b2 i c -- v ce collector-to-emitter voltage, v ce -- v collector-to-emitter voltage, v ce -- v collector current, i c -- a i c -- v ce collector current, i c -- a it15964 0 1.0 0.2 0.1 0.4 0.3 0.6 0.5 0.8 0.9 0.7 0 0.1 0.7 0.6 0.5 0.4 0.3 0.2 0.8 0.9 1.0 i b =0ma 2ma 4ma 6ma 8ma 10ma 20ma 30ma 40ma 50ma 60ma 80ma it15965 010 1 456789 3 2 0 0.02 0.14 0.12 0.10 0.08 0.06 0.04 0.16 0.18 0.20 i b =0 a 200 a 100 a 300 a 400 a 500 a 100ma 600 a 1ma 900 a 800 a 700 a
aml2002 no. a1837-3/7 cob -- v cb v be (sat) -- i c v ce (sat) -- i c v ce (sat) -- i c h fe -- i c collector current, i c -- a dc current gain, h fe collector current, i c -- a gain-bandwidth product, f t -- mhz collector-to-base voltage, v cb -- v output capacitance, cob -- pf collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- v collector current, i c -- a base-to-emitter saturation voltage, v be (sat) -- v collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- v f t -- i c it15956 10 1.0 3 5 7 2 100 3 5 7 2 100 3 5 7 2 0.01 3 257 3 257 1.0 0.1 ta=25 c v ce =5.0v 0.5v 2.0v 1.0v 0.1 1.0 23 57 2 10 100 357 2357 5 3 2 7 10 5 7 100 1.0 3 2 it15969 0.1 0.01 7 5 3 27 5 3 2 1.0 it15970 1.0 0.1 2 3 5 7 it15972 0.1 0.01 7 5 3 2 1.0 7 5 3 2 0.1 1.0 0.01 2 3 5 7 2 3 5 7 ta=75 c 25 c - -25 c i c / i b =10 i c / i b =10 ta= --25 c 75 c it15968 0.01 0.1 23 57 23 5 1.0 7 5 3 10 2 7 100 1000 7 5 3 2 v ce =10v it15971 0.1 0.01 7 5 3 2 1.0 7 5 3 2 0.1 10 0.01 2 3 5 7 1.0 2 3 5 7 2 3 5 7 ta=75 c 25 c --25 c i c / i b =20 f=1mhz 25 c h fe -- i c i c -- v be collector current, i c -- a base-to-emitter voltage, v be -- v collector current, i c -- a dc current gain, h fe it15967 2 10 100 1.0 3 5 7 2 3 5 7 1000 2 3 5 7 0.01 3 25 0.1 1.0 73 257 ta=75 c 25 c v ce =5v 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 it15966 0.4 0.3 0.1 0.2 0.9 0.8 0.7 0.6 0.5 1.0 v ce =5v 25 c --25 c ta=75 c --25 c
aml2002 no. a1837-4/7 collector current, i c -- a collector-to-emitter voltage, v ce -- v a s o collector current, i c -- a collector-to-emitter voltage, v ce -- v a s o it16012 0.001 0.01 7 5 3 2 7 5 3 2 7 5 3 2 7 5 3 2 0.1 10 1.0 1.0 0.01 2 2 5 37 0.1 2 5 37 1000 25 37 10 25 37 100 5 37 i cp =2a i c =0.7a dc operation 100ms 100 s 1ms 10ms < 10 s 500 s it16013 0.001 0.01 7 5 3 2 7 5 3 2 7 5 3 2 7 5 3 2 0.1 10 1.0 1.0 0.01 2 2 5 37 0.1 2 5 37 1000 25 37 10 25 37 100 5 37 i cp =2a i c =0.7a dc operation 100 s 1ms < 10 s 500 s 100ms 10ms ta=25 c single pulse tc=25 c single pulse p c -- tc collector dissipation, p c -- w case temperature, tc -- c 0 12 6 8 10 4 2 25 075 50 100 150 125 175 it15975 p c -- ta collector dissipation, p c -- w ambient temperature, ta -- c it15974 25 0 50 75 100 150 125 175 0 0.6 0.4 0.2 0.8 1.0 1.2 1.4 1.5 1.6
aml2002 no. a1837-5/7 bag packing speci cation aml2002
aml2002 no. a1837-6/7 outline drawing aml2002 mass (g) unit 0.97 * for reference mm
aml2002 ps no. a1837-7/7 this catalog provides information as of august, 2012. speci cations and information herein are subject to change without notice. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. the products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. if there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' s products or equipment. sanyo semiconductor co.,ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein. regarding monolithic semiconductors, if you should intend to use this ic continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. please contact us for a confirmation. sanyo semiconductor co.,ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. it is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo semiconductor co.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above.
|
